User Manual

ARTURIA – Analog Laboratory – USER’S MANUAL 77
7.2.2 Power supply
Although the Analog Laboratory keyboard is USB bus-powered, it is also possible to use
a DC adapter when this is required. If you wish to use an adapter instead of the bus
power, it is possible to connect an optional 12V DC 500mA adapter to the back of the
Analog Experience “The Laboratory” keyboard.
7.3 Basic MIDI control
Every parameter of Analog Laboratory is controllable by the included keyboard
controller. Once the software is started and the keyboard controller is connected, the
software can be totally controlled without the use of mouse or a computer keyboard.
Every physical controller (knob, fader, button) on the hardware is mapped to a part of
the software, and is dependant on each preset.