User Manual
Table Of Contents
- User Manual
- Special Thanks
- Thank you for purchasing KeyLab mkII!
- Special Message Section
- Introduction
- Table Of Contents
- Getting Started
- Overview
- Analog Lab mode
- DAW mode
- User mode
- Chord mode
- CV / Gate / Mod connections
- MIDI Control Center
- Connecting to MIDI Control Center
- MCC Controller Map
- Customize the Wheels
- Select the User Channel
- Customize the Pads
- Customize the User buttons
- Customize the Encoders
- Customize the Faders
- Customize the Select buttons
- Customize the Keyboard
- Customize the CV Modulation Input
- Customize the Pedals
- Customize the Pitch Out
- Customize the Gate Out
- Customize the Mod 1 / Mod 2 outputs
- The Device Settings tab
- Import and Export buttons
- Software License Agreement
- Declaration of Conformity
1.3. The Front Panel (right)
1. Preset Browser & Display This section is used to select presets in Analog Lab 3,
navigate menus, and display parameter and preset information.
2. Control buttons This section of 3 buttons is used in Analog Lab mode to switch
between the 2 parts in Multi Mode, select the Live tab in Analog Lab 3, and set the
split point between Parts 1 and 2. In DAW mode they're used to select the track
group in increments of 1 or 8.
3. Encoders The rotary knobs are used to control software instrument parameters,
as well as channel pan within your DAW.
4. Faders The faders are used to alter software instrument parameters, as well as
to change the volume of channels within your DAW.
5. Filter / Select buttons These buttons are used to filter preset types in Analog Lab
mode, select tracks in DAW mode, and perform user-defined functions in User
mode.
6. User Parameters The keys in the upper octave are used as shortcuts [p.48] in User
Edit mode [p.44].
Arturia - User Manual KeyLab MkII - Getting Started 6