User Manual
Table Of Contents
- User Manual
- Special Thanks
- Thank you for purchasing KeyLab mkII!
- Special Message Section
- Introduction
- Table Of Contents
- Getting Started
- Overview
- Analog Lab mode
- DAW mode
- User mode
- Chord mode
- CV / Gate / Mod connections
- MIDI Control Center
- Connecting to MIDI Control Center
- MCC Controller Map
- Customize the Wheels
- Select the User Channel
- Customize the Pads
- Customize the User buttons
- Customize the Encoders
- Customize the Faders
- Customize the Select buttons
- Customize the Keyboard
- Customize the CV Modulation Input
- Customize the Pedals
- Customize the Pitch Out
- Customize the Gate Out
- Customize the Mod 1 / Mod 2 outputs
- The Device Settings tab
- Import and Export buttons
- Software License Agreement
- Declaration of Conformity
3.4. Encoders and Faders
As with each mode in the KeyLab mkII, when you enter Analog Lab mode the controls to the
right of the display assume different functions. We covered the Filter buttons in the Browsing
Presets section [p.26]; now we will describe the new functions of the encoders and faders.
♪: It is possible that some presets may have different controller assignments than are listed on the
front panel.
3.4.1. The Encoders
The blue text under the encoders reveals their function for Part 1 and Part 2 in Analog Lab
mode:
Encoder # Function Description
1 Cutoff Controls cutoff frequency of the filter(s)
2 Resonance Sets the resonance amount for the filter(s), when available
3 LFO Amt Determines the depth of the LFO modulation
4 LFO Rate Adjusts the speed or sample/hold time of the LFO(s)
5 Param 1 Assignable; varies per preset
6 Param 2 Assignable; varies per preset
7 Param 3 Assignable; varies per preset
8 Param 4 Assignable; varies per preset
9 Chorus Controls the chorus effect level
Arturia - User Manual KeyLab MkII - Analog Lab mode 28