User Manual
Table Of Contents
- User Manual
- Special Thanks
- Thank you for purchasing KeyLab mkII!
- Special Message Section
- Introduction
- Table Of Contents
- Getting Started
- Overview
- Analog Lab mode
- DAW mode
- User mode
- Chord mode
- CV / Gate / Mod connections
- MIDI Control Center
- Connecting to MIDI Control Center
- MCC Controller Map
- Customize the Wheels
- Select the User Channel
- Customize the Pads
- Customize the User buttons
- Customize the Encoders
- Customize the Faders
- Customize the Select buttons
- Customize the Keyboard
- Customize the CV Modulation Input
- Customize the Pedals
- Customize the Pitch Out
- Customize the Gate Out
- Customize the Mod 1 / Mod 2 outputs
- The Device Settings tab
- Import and Export buttons
- Software License Agreement
- Declaration of Conformity
8.3. Customize the Wheels
♪: Settings of
Part 2
and
Both
are only recommended when Split mode is active. That is the only time
that Part 2 is available from the keyboard.
8.3.1. Pitch Bend
The Pitch Bend wheel is reserved for that function; it can't be assigned to send any other
type of MIDI data. But you can select whether it will affect Part 1, Part 2, or both.
8.3.2. Modulation
• Mode: Select "Control" to view the rest of the parameters. Select "Off" and the
Modulation wheel will be disabled for both Part 1 and Part 2.
• Channel: Specify whether the Modulation wheel will affect Part 1, Part 2, or both.
• CC Number: The Modulation wheel sends MIDI CC# 1 by default, but it can be
configured to transmit any MIDI CC#.
• Min Value: Click/drag the knob or enter a value in the field below to set the
minimum value the Modulation wheel will send.
• Max Value: Click/drag the knob or enter a value in the field below to set the
maximum value the Modulation wheel will send.
8.4. Select the User Channel
There's a small, rectangular button between the wheels and the pads that is labeled MIDI
Ch. Click the graphic and you will be able to specify the User MIDI channel for the KeyLab
mkII.
♪: The MIDI Channel number selected for the MIDI Ch button will also change the MIDI Channel for
any control that has its MIDI Channel set to "User".
63 Arturia - User Manual KeyLab MkII - MIDI Control Center