User Manual
Table Of Contents
- User Manual
- Special Thanks
- Thank you for purchasing KeyLab mkII!
- Special Message Section
- Introduction
- Table Of Contents
- Getting Started
- Overview
- Analog Lab mode
- DAW mode
- User mode
- Chord mode
- CV / Gate / Mod connections
- MIDI Control Center
- Connecting to MIDI Control Center
- MCC Controller Map
- Customize the Wheels
- Select the User Channel
- Customize the Pads
- Customize the User buttons
- Customize the Encoders
- Customize the Faders
- Customize the Select buttons
- Customize the Keyboard
- Customize the CV Modulation Input
- Customize the Pedals
- Customize the Pitch Out
- Customize the Gate Out
- Customize the Mod 1 / Mod 2 outputs
- The Device Settings tab
- Import and Export buttons
- Software License Agreement
- Declaration of Conformity
8.9.4. Select button Program Change
• Channel: Select the MIDI channel output for the selected button, between 1 to 16.
This can also be set to “User”, which will make the button output to the MIDI
channel selected for the MIDI Ch button [p.63].
• Program Number: Select the MIDI Program number the button will send when
activated. Click/drag the knob or enter a value between 0 and 127 in the field
below.
• Bank LSB: Defines the Bank Select value for Least Significant Byte (MIDI CC# 32)
that the button will send when activated. Click/drag the knob or enter a value
between 0 and 127 in the field below. Not all devices respond to Bank LSB, so
consult the documentation of the hardware or software instrument you want to
control.
• Bank MSB: Defines the Bank Select value for Most Significant Byte (MIDI CC# 0)
that the button will send when activated. Click/drag the knob or enter a value
between 0 and 127 in the field below. Not all devices respond to Bank MSB, so
consult the documentation of the hardware or software instrument you want to
control.
73 Arturia - User Manual KeyLab MkII - MIDI Control Center