User Manual
Table Of Contents
- User Manual
- Special Thanks
- Thank you for purchasing KeyLab mkII!
- Special Message Section
- Introduction
- Table Of Contents
- Getting Started
- Overview
- Analog Lab mode
- DAW mode
- User mode
- Chord mode
- CV / Gate / Mod connections
- MIDI Control Center
- Connecting to MIDI Control Center
- MCC Controller Map
- Customize the Wheels
- Select the User Channel
- Customize the Pads
- Customize the User buttons
- Customize the Encoders
- Customize the Faders
- Customize the Select buttons
- Customize the Keyboard
- Customize the CV Modulation Input
- Customize the Pedals
- Customize the Pitch Out
- Customize the Gate Out
- Customize the Mod 1 / Mod 2 outputs
- The Device Settings tab
- Import and Export buttons
- Software License Agreement
- Declaration of Conformity
8.12. Customize the Pedals
♪: All 5 pedal inputs have the same parameters, so we'll cover them all in this section.
The Mode menu lets you choose between the 4 modes available for the pedal inputs. Each
mode contains a unique set of parameters:
8.12.1. Pedal Off
Disables the selected pedal. This can be used to prevent accidentally changing your sound
when the selected pedal is not needed in the User preset.
8.12.2. Pedal Control
This mode lets you customize how each pedal responds when used.
• Channel: Select the MIDI channel output for the selected pedal, between 1 to 16.
This can also be set to “User”, which will make the pedal output to the MIDI
channel selected for the MIDI Ch button [p.63].
• CC Number: The selected pedal can be set to transmit any MIDI CC# between
0-127. Many MIDI CC numbers are named within the drop-down menu to identify
standard uses.
• Min Value & Max Value: These parameters let you set the minimum and
maximum range of the selected pedal. Click and drag the knobs or enter a value
in the fields below them to set the range.
♪: The Continuous Pedal Calibration [p.80] parameter in the Device Settings section [p.79] allows you
to calibrate the physical response range for each pedal when its Mode is set to Control.
Arturia - User Manual KeyLab MkII - MIDI Control Center 76