User Manual

5.11.2. Unison / mono allocation
The Uni/Mono Allocation options are identical for the upper and lower zones regardless of
the Timbrality mode (Single, Layer, or Split). The lower zone settings can be accessed even
when the keyboard is not split.
To access these settings when the Single/upper zone is in Unison or Mono mode, hold
[Settings] and press [Polyphony]. To access these settings for the lower half when it is in
Unison or Mono mode, hold [Timbrality] for 1 second.

♪: To define the number of voices used by a zone in Unison mode, read this section [p.37].
Choose one setting from the Priority column and one from the Legato column:
• Priority Lower: The lowest note is played and higher notes are ignored.
• Priority Higher: The highest note is played and lower notes are ignored.
• Priority Last: The held note can be stolen by a higher or lower note.
• Legato On: Only retriggers the envelopes after all notes have been released, so
successive notes will slur.
• Legato Off: Every note played retriggers the envelopes.
• Legato Glide: If glide is active, playing legato notes does not retrigger the
envelopes and also glides from one pitch to the next.
44 Arturia - User Manual PolyBrute - Performance Controls