User Manual

12.2.2. Voice: Envelopes
The VCF and VCA have identical velocity and envelope modes, so they are described
together.
12.2.2.1. VCF/VCA velo mode
• Amount Only provides the normal response. With the Amount+ Times modes the
velocity affects the Attack, Decay and Release Times. Amt+Time Natural shortens
the Attack Time and extends the Decay and Release Times with higher velocities,
while Amt+Time Shorten shortens all Times and Amt+Time Extend extends all
Times.
• Single runs the envelope once. The Repeat options run the envelope 2 or 3 times.
Looping runs the envelope indefinitely. When Sustain is at a non-zero value, the
Repeats and Loops include the Release stage.
12.2.2.2. VCF/VCA/MOD env curves
• Use [Assign 1-2] to select the Attack curve.
• Use [Assign 5-6] to select the shared curve for the Decay and Release stages.
12.2.2.3. MOD env loop mode
• Use [Assign 1-4] to select the loop mode for the MOD envelope.
• Single runs the envelope once. The Repeat options run the envelope 2 or 3 times.
Looping runs the envelope indefinitely. When Sustain is at a non-zero value, the
Repeats and Loops include the Release stage.
Arturia - User Manual PolyBrute - Settings 85