User Manual

ARTURIA – CS-80 V – USER MANUAL 39
Setting the VCA envelope
Four faders set the action of the velocity and of the pressure of the keys on the
frequency of the filters and the level of the VCA. The green faders to control the
frequency, the gray ones to control the volume.
Setting the filter frequency and the amplifier volume modulations
Each of the lines of synthesis can be transposed with the 1-FEET-2 selector: an octave
below (16’), default range (8’), a fifth above (5 1/3’), an octave above (4’), a fifth
and an octave above (2 1/3’), two octaves above (2’).
The second line can be tuned with the DETUNE fader, and finally the mixing between
the two lines is controlled with the MIX fader.
Transposition of the lines of
synthesis
Detuning of the second
line
Mixing of the two
lines
Additional buttons SYNC and LINK increase your sound design options:
 The SYNC button synchronizes the oscillator of the first line with the oscillator
of the second. When activated, it is the frequency of the second oscillator
that will be audible, the frequency of the first being imposed on the second
in order to create new harmonics.
 The LINK button connects the oscillator of the second line toward the filters of
the first. The filters and amplifier of the second line are not used and therefore
deactivated to conserve calculation power.