User Manual

ARTURIA – CS-80 V – USER MANUAL 43
Key follows
3.5.5 The ring modulator
The ring modulator is an effect that creates a number of harmonics in the sound
through the multiplication of the input signal with a sine wave.
Setting the ring modulator
Dry and wet mixing is set with the >M< fader. Dry sound is at maximum in the high
position. The frequency of the multiplying sine is set with the SPEED fader. The lower
the fader is positioned, the higher the sine frequency. The generated harmonics will
then move away from harmonics of the treated sound.
Three other faders modulate this effect. These set an envelope applied to the
frequency of the sine. ATTK gives the time taken for the sine to go from the initial
frequency set by SPEED, to the frequency set by DEPTH, while DECAY sets the time
for the return to the initial frequency.
3.5.6 chorus/tremolo
Chorus/Tremolo is an effect that allows a variety of effects, from simulation of an
ensemble to that of a rotary speaker. It is activated with the CHOR switch.
Setting chorus/tremolo