User Manual

16 ARTURIA – DrumBrute – USER’S MANUAL
These knobs and buttons add a fun and expressive way to control the overall sound of
the DrumBrute during performance. Select the filter type with the HPF button (off = LPF,
or Low Pass Filter), sweep the filter frequency with the Cutoff knob, and use the
Resonance knob to control the filter emphasis.
To hear the unfiltered signal, press the Bypass button.
To learn more about the Output Filter options, see section 3.2.1.
2.3.2 Master volume
This knob controls the master output level of the DrumBrute. It does not affect the
headphone level; that is controlled by a recessed knob on the rear panel.
2.3.3 Pattern effects
Swing introduces a “shuffle” feel to the patterns. It can affect the entire pattern (all
instruments at once) or only the current instrument track, leaving the others untouched.
Randomness introduces an increasing amount of unpredictability to the patterns. As with
the Swing setting, this control can affect the entire pattern or only the current
instrument track, leaving the others untouched.
For more details on these features, see sections 5.1.7 and 5.1.8.
2.3.4 Roller/Looper/Step Repeat
The Master Volume knob will not affect the level of an instrument when a cable is
plugged into the rear panel output of that instrument. In this case, use the Level
knob above that instrument’s drum pad. See section 2.7 for more information.