User Manual

ARTURIA – DrumBrute – USER’S MANUAL 19
Remember that some pads provide access to more than one instrument, each of which
has its own track in the pattern sequencer. Counting all of the shared channels, there
are actually 16 separate instruments available from the 12 pads.
2.5 Metronome, Mute/Solo + Shift
Metronome controls Mute/Solo/Shift buttons
2.5.1 Metronome
To enable the metronome, press the On button. This will provide a timing reference
while DrumBrute is running. Various timing values are available for the click. See section
3.1.4 for information about this.
The click level is controlled by the Metro Volume knob. The metronome also has a
dedicated output jack on the rear panel.
For a description of the output options for the Metronome see section 2.7.
2.5.2 Mute/Solo buttons
These buttons allow you to silence one or more instruments or isolate specific
instruments while recording a pattern or playing it back.
For more information about using the Mute and Solo buttons, see section 5.1.4.
2.5.3 Shift button
The Shift button is used in conjunction with other controls to perform secondary
functions such as Fine Tempo adjustment or clearing the Mute group.
Each specific use of the Shift button will be described in the appropriate section of this
manual. For a complete list of Shift functions see section 7.4.