User Manual

ARTURIA – DrumBrute – USER’S MANUAL 39
• Press and release the Copy button. The Bank and Ptrn buttons and all of the pads
will flash.
• Press the Closed Hat pad. This is the track that will be copied.
• Press the instrument select button for the Maracas/Tamb shared channel until the
Tambourine LED is lit.
• Tap the Maracas/Tamb pad. It will flash quickly so you will know the process is
complete.
When copying between single-channel instruments, simply skip the third step in the
process.
5.2.7.2 Between patterns
The process of copying an instrument track between patterns in the same bank is almost
identical to the one described above. We’ll only copy tracks between single-channel
instruments this time.
Select a pattern with an interesting Closed Hat part and then follow these steps:
• Press and release the Copy button. The Bank and Ptrn buttons and all of the pads
will flash.
• Press the Closed Hat pad. This is the track that will be copied.
• Press the Ptrn button.
• Select the target pattern by pressing one of the Step buttons.
• Tap the Closed Hat pad. It will flash quickly so you will know the process is
complete.
To copy the Closed Hat track to a different instrument in the target pattern, select that
instrument’s pad in the final step instead of the Closed Hat pad.
5.2.7.3 Between banks
The process of copying an instrument track between patterns in different banks is almost
identical to the procedures described above. We’ll only copy tracks between single-
channel instruments this time.
Select a pattern with an interesting Closed Hat part and then follow these steps:
• Press and release the Copy button. The Bank and Ptrn buttons and all of the pads
will flash.
The following procedure will overwrite the Closed Hat track in the target pattern.
The following procedure will overwrite the Closed Hat track in the target pattern.
The copy procedure in section 5.2.7.2 happens “behind the scenes” in the Flash
memory, not in the active RAM. So if you want to audition the copied track(s) in the
target pattern immediately, you will need to load the pattern into RAM from the
Flash memory. To do so, select the pattern, hold the Shift button and press Ptrn.