User Manual

42 ARTURIA – DrumBrute – USER’S MANUAL
5.4 Copy a Pattern
There may be times when you would like to have a pattern become the basis for another
section within a song, only with a few modifications. Copying the pattern into a different
location can be a quick way to accomplish this.
Let’s say you’d like to copy pattern #1 to pattern location #8 within the current bank.
Here are the steps to follow:
• Select pattern #1 by pressing Step button 1.
• Press the Copy button. Lots of buttons will flash to indicate you are in Copy
mode. Step button 1 should be lit solid, which means it is the pattern being
copied.
• You want to copy a pattern, not a bank, so press the Ptrn button. The Copy and
Ptrn buttons will flash, and Step button 1 will now flash also.
• Step buttons 2-15 will be lit solid, which means they are potential destinations for
the pattern being copied.
• Press Step button 8. It will flash for half a second, and then Step buttons 2-15
will go dark so you’ll know the process is complete.
To learn how to copy a pattern between banks, see section 6.2.2.
The following procedure will erase pattern #8 in the current bank. Be sure that
pattern location is available before proceeding.