User Manual

44 ARTURIA – DrumBrute – USER’S MANUAL
• Press the Ptrn button.
• Press the Bank button.
• Press Step button 2 to select Bank B.
• Press the Ptrn button.
• Press Step button 15. It will flash for about a second so you’ll know the process
was successful.
6.3 Copy Drum to Drum
These procedures were covered extensively in section 5.2.7:
• To copy an instrument track to another instrument within the same pattern, see
section 5.2.7.1.
• To copy an instrument track into a different pattern in the same bank, see section
5.2.7.2.
• To copy an instrument track into a pattern in a different bank, see section
5.2.7.3.
6.4 Erasing a Bank
To erase all 16 patterns in a bank:
• Be sure you know which bank you want to erase. This process cannot be undone.
• Press the Erase button. Lots of buttons and pads will flash.
• Press the Bank button. The Step button for the currently selected bank will flash.
• Use the Step buttons to select the bank you want to erase. It will flash rapidly for
about a second.
When the flashing stops, the process is complete.
6.5 Erasing a Pattern
To erase one of the patterns in a bank:
• Be sure you know which pattern you want to erase. This process cannot be
undone.
• Press the Erase button. Lots of buttons and pads will flash.
• Press the Ptrn button. The Step button for the currently selected pattern will
flash.
• Use the Step buttons to select the pattern you want to erase. It will flash rapidly
for about half of a second.