User Manual

ARTURIA – DrumBrute – USER’S MANUAL 59
Sending an edited pattern to DrumBrute (not synced)
10.4 Store To/Recall From
10.4.1 The ‘Store To’ button
The upper left-hand section of the MIDI Control Center has a button called “Store To”. It
is used to transmit a Template from the Local Templates window to the DrumBrute.
If there is a particular Template you would like to transmit to your DrumBrute, select it
in the Local Templates window.
If DrumBrute and the MCC have been synced, all 64 patterns from the Template will be
transmitted to your DrumBrute as soon as you select the Template.
But if DrumBrute and the MCC have not been synced, you will need to use the Store To
button to transmit the Template.
The process is similar to the one described previously:
• Select the desired Template as shown below
• Click the Store To button at the bottom of the window.
The following process will overwrite the internal memory of the DrumBrute. If you
are not sure those patterns have been backed up, be sure to archive them to your
computer using the Recall From button.