User Manual
ARTURIA – DrumBrute – USER’S MANUAL 65
The new events will have the same velocity values as the original events.
10.7.4.4 Event velocity
If you click on the top of an event you will see the cursor become a vertical arrow icon.
Drag the cursor up and down to change the velocity of that event to a value between 1
and 127.
The color of the selected event will change to indicate the velocity value: white is the
lowest velocity value and red is the highest velocity value.
When the velocities of multiple events are edited at the same time they will all change to
the same value.
10.7.4.5 Shift Timing
The shift timing feature was described more fully in section 5.2.6. In this section we will
show how to use this feature inside the MCC Pattern window.
To shift the timing of an event, hold the Shift key on your computer keyboard and then
click on an event. A small window will appear and show the current time shift value.
Drag the cursor left and right to change the time shift value of that event. The range is
from -/+50%.
Shift timing value of -17% applied to an event.
In the image above the Kick drum has two events that are not shifted, while the third
event has been shifted ahead of the beat by a value of -17%.
It is also possible to shift the timing of several events at the same time, even events
from different instrument tracks.
Three events shifted +28%
Shift timing is measured in terms of percentage of the pattern’s time division
setting. It is not shifted by a fixed unit of time (msec, pulses, clocks, etc.).