User Manual

1.5. Rear panel, part 1
1. Clock input/output
2. MIDI input/output
3. USB
4. Power
1.5.1. Clock input/output
The Clock input allows the DrumBrute Impact to interface with pre-MIDI devices that used
these connectors for synchronization, such as early drum machines by Korg and Roland.
Other vintage devices may use different types of connectors which should be readily
available.
1.5.2. MIDI input/output
Use standard MIDI cables to send and receive MIDI note and clocking data between the
DrumBrute Impact and MIDI-compatible devices.
1.5.3. USB
This port provides the data connections to a computer. In addition to synchronizing the
DrumBrute Impact with your DAW, the USB connection enables you to use the MIDI
Control Center software to configure extra parameters, edit pattern data, and to update the
DrumBrute Impact software.
1.5.4. Power
From left to right in this section are the 12V DC power connector and the power switch. Use
only the included power supply to avoid damage to the DrumBrute Impact.
17 Arturia - User Manual DrumBrute Impact - Overview