User Manual

4.2.9. Erasing a Drum Track
If you’ve decided you don’t want a certain instrument track to be part of the pattern any
more, the process couldn’t be simpler:

!: Be sure you’ve selected the correct pattern. This process cannot be undone.
• Press and release the Erase button. The Erase, Bank and Ptrn buttons and all of
the pads will flash.
• If you need to erase the track for only one instrument from a shared channel,
be sure to use the instrument select button to select that instrument before you
proceed.
• Tap the pad of the instrument track you want to erase. It will flash quickly and
then stop, so you will know the process is complete.
Arturia - User Manual DrumBrute Impact - Pattern Mode 50