User Manual

4.5. Copy a Pattern
There may be times when you would like to have a pattern become the basis for another
section within a song, only with a few modifications. Copying the pattern into a different
location can be a quick way to accomplish this.

!: The following procedure will erase pattern #8 in the current bank. Be sure that pattern location is
available before proceeding.
Let’s say you’d like to copy pattern #1 to pattern location #8 within the current bank. Here
are the steps to follow:
• Select Pattern mode by pressing Ptrn button.
• Select pattern #1 by pressing Step button 1.
• Press the Copy button. Lots of buttons will flash to indicate you are in Copy mode.
Step button 1 should be lit solid, which means it is the pattern being copied.
• You want to copy a pattern, not a bank, so press the Ptrn button. The Copy and
Ptrn buttons will flash, and Step button 1 will now flash also to indicate it is the
source pattern.
• Any patterns that already contain data will have the corresponding Step button
lit red. Any empty patterns will be dark.
• Press Step button 8. It will flash for half a second, and then Step buttons 2-16 will
go dark so you’ll know the process is complete. Pattern #1 is still selected, so if
you want to modify pattern #8 you'll need to select that pattern by pressing Step
button 8.
To learn how to copy a pattern between banks, see this section [p.60].
Arturia - User Manual DrumBrute Impact - Pattern Mode 54