User Manual

5.7.2. Pattern-level features
5.7.2.1. Tempo
Each pattern can be saved with its own tempo setting, and as a result it is possible for a
song to contain a different tempo every time a different pattern is used.
But there is a front panel parameter that allows you to override these individual tempo
values: Global BPM. To activate this feature is simple: just hold the Shift button and press
Step button 15.
After this, every song and pattern in the DrumBrute Impact will play at the same tempo,
which you may then set to whichever value you like as described in section [p.38].
5.7.2.2. Swing/Random
These features are described in greater detail in the Pattern Mode chapter [p.38]. When using
them in Song mode, keep in mind that any edits you make with the Swing and Random
encoders could reset to the Pattern mode values when a pattern boundary is crossed, if the
next pattern is from a different bank.
These parameters are always reset to the values stored when a bank change occurs.
5.8. Mute and Solo in Song mode
The Mute and Solo features work exactly the same way in Song mode that they do in Pattern
mode. In fact, the Mute/Solo groups are shared between Song and Pattern modes. So the
pads that were muted/soloed in Pattern mode will also be muted/soloed in Song mode, and
vice versa.
For a full description of how to use these features, see the Mute/Solo features section [p.40]
of the Pattern Mode [p.38] chapter.
Arturia - User Manual DrumBrute Impact - Song Mode 58