User Manual

4.2.7.3. Between banks (instrument)
The process of copying an instrument track between patterns in different banks is almost
identical to the procedures described above. We’ll only copy tracks between single-channel
instruments this time.

The following procedure will overwrite the Closed Hat track in the target pattern.
Select a pattern with an interesting Closed Hat part and then follow these steps:
• Press and release the Copy button. The Copy, Bank and Ptrn buttons and all of
the pads will flash.
• Press the Closed Hat pad. This is the track that will be copied.
• Press the Bank button.
• Select the target bank by pressing one of the first four Step buttons.
• Press the Ptrn button.
• Select the target pattern by pressing one of the Step buttons.
• Tap the Closed Hat pad. It will flash quickly so you will know the process is
complete.
To copy the Closed Hat track to a different instrument in the target pattern, select that
instrument’s pad in the final step instead of the Closed Hat pad.
4.2.8. Erasing a Drum Track
If you’ve decided you don’t want a certain instrument track to be part of the pattern any
more, the process couldn’t be simpler:

Be sure you’ve selected the correct pattern. This process cannot be undone.
• Press and release the Erase button. The Erase, Bank and Ptrn buttons and all of
the pads will flash.
• Tap the pad of the instrument track you want to erase. It will flash quickly and
then stop, so you will know the process is complete.
Arturia - User Manual DrumBrute - Pattern Mode 40