User Manual

If you decide you want more than 32 steps for this pattern, hold the Last Step button
and press >> until the White LED is over the correct Step Group number. Then press the
appropriate Step button and you’re ready to create.
4.2.9.3. Editing steps 17-32
If you want to focus on steps 17-32 while editing, here’s what to do:
• Disable Pattern Follow mode (turn off the << >> buttons).
• Press >> once to move the Red LED over #32.
The Step buttons now show the status of steps 17-32. You can play the pattern while editing,
if you want; it will play all 32 steps, but the Step buttons will stay focused on steps 17-32.
Simply edit the steps as desired with the Step buttons, or play them on the pads. When
you’re finished you can re-enter Pattern Follow mode with the << >> buttons if you like.
4.3. Save the Pattern!

If you switch between banks you will lose any edits you have made to the patterns within the
original bank. This will also happen if you switch to Song mode.
It’s a good idea to save your patterns often while you are working on them.
To save the current pattern, hold the Save button and then press the Ptrn button. Both buttons
will flash quickly to indicate that your pattern has been saved to the internal memory.
4.4. Copy a Pattern
There may be times when you would like to have a pattern become the basis for another
section within a song, only with a few modifications. Copying the pattern into a different
location can be a quick way to accomplish this.

The following procedure will erase pattern #8 in the current bank. Be sure that pattern location is
available before proceeding.
Let’s say you’d like to copy pattern #1 to pattern location #8 within the current bank. Here
are the steps to follow:
• Select Pattern mode by pressing Ptrn button.
• Select pattern #1 by pressing Step button 1.
• Press the Copy button. Lots of buttons will flash to indicate you are in Copy mode.
Step button 1 should be lit solid, which means it is the pattern being copied.
• You want to copy a pattern, not a bank, so press the Ptrn button. The Copy and
Ptrn buttons will flash, and Step button 1 will now flash also.
• Step buttons 2-15 will be lit solid, which means they are potential destinations for
the pattern being copied.
• Press Step button 8. It will flash for half a second, and then Step buttons 2-15 will
go dark so you’ll know the process is complete.
To learn how to copy a pattern between banks, see section [p.44].
Arturia - User Manual DrumBrute - Pattern Mode 42