User Manual

7. SYNCHRONIZATION
DrumBrute can be the master clock for an entire MIDI rig, or it can just as happily serve as
a slave to any one of several sources. See section [p.4] for connection diagrams.
You can cycle through the various Sync options using the Sync button. A white LED will let
you know which mode you’ve selected.

Note The Sync setting cannot be changed while DrumBrute is playing a pattern.
7.1. As Master
DrumBrute is the master clock when the INT button is lit. When this is the case:
• The transport section will control the internal sequencer.
• MIDI clock messages are sent to MIDI out, USB MIDI, and the Clock output.
• The tempo can be set using the Rate/Fine encoder and the Tap Tempo button.
• Hold Shift and turn the Rate/Fine encoder to fine-tune the tempo.
51 Arturia - User Manual DrumBrute - Synchronization