User Manual

8.4.2. Revise a Template
You can edit the patterns of an archived Template. Simply select that Template and its
patterns will appear in the MCC Pattern Editor window, ready for editing.
If you would like to confirm the results by having the patterns played on the DrumBrute,
there are two ways.

The following process will overwrite the Working Memory and the pattern memory of the DrumBrute.
Be sure to save what you were doing before you transfer the file!
First use the Save or Save As… buttons to save your changes, then:
• drag the revised Template from the Local Templates window and drop it on the
Working Memory, or
• press the Store To button (see section [p.58]).
8.4.3. Send one pattern to DrumBrute

Important: The following process will send a single pattern to DrumBrute and will overwrite the
pattern in that memory location.
If you’d like to transfer only one pattern from a Template to the DrumBrute, find that pattern
in the Local Templates window and drop it onto the Working Memory. This will send the
selected pattern directly into the DrumBrute at that same pattern location.
In the example below, pattern #1 from Bank A of the “A Big Gig” Template will overwrite
pattern #1 in Bank A of the DrumBrute internal memory.
57 Arturia - User Manual DrumBrute - MIDI Control Center