User Manual

8.5. Store To/Recall From
8.5.1. The ‘Store To’ button
The upper left-hand section of the MIDI Control Center has a button called “Store To”. It is
used to transmit a Template from the Local Templates window to the DrumBrute.

The following process will overwrite the internal memory of the DrumBrute. If you are not sure those
patterns have been backed up, be sure to archive them to your computer using the Recall From button.
If there is a particular Template you would like to transmit to your DrumBrute, select it in the
Local Templates window.
To load a template into the DrumBrute memory, you will need to use the Store To button to
transmit it.
The process is simple:
• Select the desired Template as shown below
• Click the Store To button at the bottom of the window.
This process will store all of the patterns from the selected Template into the DrumBrute.
8.5.2. Recall edited patterns from the DrumBrute
If you changed any patterns inside the DrumBrute, you need to pull those patterns into the
MIDI Control Center to back them up. To do that, click the Recall From button. A new file
containing all 64 patterns will appear in the Local Templates window with the current time/
date stamp for a name. You can rename it if you like.
Arturia - User Manual DrumBrute - MIDI Control Center 58