User Manual

8.5.3. Save, Delete, Import/Export, etc.
These important features have been documented in the MIDI Control Center manual, which
you will find in the software Help menu. Look in section [p.46] of the Help file for information
about Save, Save As…, New, Delete, Import and Export.

The Import / Export buttons pictured above perform a different function from those at the top of the
Device Settings window (see section [p.59] below).
These files will have the extension .drumbrute. They contain all of the internal DrumBrute
parameters: a complete set of 64 patterns and all of the Device Settings. Use these files to
share settings and patterns with other users.
8.6. Import/Export Device Settings
When the Device Settings tab is selected in the MIDI Control Center window you will see
two buttons on the upper right labeled Import and Export. The function of these buttons
is to manage files containing only the Device Settings. They are different from the buttons
described in section [p.59], which are used to generate a file containing both the Device
Settings and the patterns.
The Device Settings files carry the extension .drumbrute_ds. You can swap these files with
other users or build a library of configurations for the different systems you encounter in
different locations.
8.6.1. Export Device Settings
To export the Device Settings, click the Export button. Then navigate to the appropriate
location in your computer and follow the prompts to save the .drumbrute_ds file.
8.6.2. Import Device Settings
To import the Device Settings, click the Import button. Then navigate to the appropriate
location in your computer and follow the prompts to load in the .drumbrute_ds file.
59 Arturia - User Manual DrumBrute - MIDI Control Center