Musical Instrument User Manual

ARTURIA – JUPITER-8V – USER’S MANUAL

The choice of filters is the same as with “PATCH” presets.

In the unfolding menu, the choice “No filter” is particularly useful to quickly pass through

presets of the same type.

If a preset is modified, this symbol “*” will appear next to the name of the preset.

The key mode must be in Dual or Split in order to get access to the Lower “Prog” part.

6.2.3 Creating a new preset

To create a new preset (PATCH or PROGRAM), click on the button, the name:

“New_Patch” or “New_Prog” will appear. Then you can work on the parameters of the

sound, to save the sound under the same preset name while clicking on the save button.

You can also change the name of the new preset by clicking on the name.

The new preset will always be a patch of the type WHOLE by default. To change the preset mode, click on

one of the two other types you would like to choose.

6.2.4 Save a user preset

To save your current settings of the preset, click on the “Save” button on the

toolbar.

6.2.5 Save a user preset using the “Save as” option

To save your current settings of the preset under another name, click on the «save as»

button on the toolbar . A dialog window will appear. It will let you set the name of the

preset PATCH and set the search filter type of the preset “PROJECT”. Click on “OK” to

save. At this point, the preset PROGRAM will not be modified, even if you changed the

synthesis parameters. To save a preset PROGRAM, check “Save As”. You can fill in the

name of the project and the name of the patch to define the search criteria. You can also

click cancel to exit this menu without saving.

“Save As” and the save menu