User Guide / Owners Manual

ARTURIA – Matrix-12 V – USER MANUAL 66
4.6.2 The Voice page
The Voices page has fewer features in Single mode than it does in Multi mode, which
is to be expected since you can only work with one Voice at a time. But it still is
capable of enhancing that Voice quite a bit! Options include independent panning
and transposition for each of the 12 voices, the ability to have two mono voices
stacked on the right side of the keyboard with the other 10 voices layered and
detuned on the left side, etc.
Plus, the Voices page houses the VIB parameter group. So there are a lot of features
to discuss here.
So now let’s take a look at the Parameter groups on the Voices page and see what
they can do in Single mode.
The first step is to select a preset that’s a Single, not a Multi. If you’re not sure, then
click the word “Voices” to access the Voices page. You should see a page that
looks like this:
A portion of the Voices page in Single mode
…with the name of the Single preset in the Page bar and also “greened out” in the
display column to the left.
But if what you see looks like this instead:
An example of the Voices page in Multi mode
…then Matrix-12 V is in Multi mode, not Single mode. Select one of the Single presets
from the Factory banks so what we’re describing and what you’re seeing are the
same thing.
When you’re ready, see the next section. We’ll start with the parameter group
labeled “Voices” and work our way across the screen.