User Guide / Owners Manual

ARTURIA – Matrix-12 V – USER MANUAL 77
The Voices parameter group in Multi mode
 Voices 1 and 2 are in group 1, so they share the same Single mode
preset. But Voice 1 is an octave lower than Voice 2 and slightly quieter.
They’ve been assigned to Zone 1 also.
 Voices 3-7 (5 Voices) are in group 2 and sharing one Single mode preset.
But each Voice is slightly detuned from the others and panned to a
different location in the stereo field. All five Voices are assigned to Zone
2.
 Voices 8-12 (5 Voices) are in group 3, sharing a Single mode preset. But
in addition to different Transpose, Detune, Volume and Pan settings they
are also assigned to MIDI channel 3 (not a Zone), so they will respond to
incoming MIDI data on that channel without being additionally
constrained by the settings of a Zone.
You can create up to 12 groups inside the Multi, so there are lots of other
possibilities, too.
5.3.3 Selecting a single
If you’d like to select a new Single mode preset for a Voice inside the Multi, all
you have to do is click inside the name field for that Voice.