User Guide / Owners Manual

ARTURIA – Matrix-12 V – USER MANUAL 78
Selecting a new preset for a Voice
After that it’s very similar to selecting one from the tool bar: just navigate to the
bank and type you want and make a selection from the presets inside that
type.
You can also use the small vertical arrows next to the Voice name to select a
new preset inside the current bank and type.
5.3.4 Zones
The Zones parameter group allows you to specify MIDI channel response, MIDI
note range, monophonic and polyphonic keyboard modes, and enable voice
stealing. These settings will be in effect for any Voices that have been assigned
to a given Zone.
5.3.5 VIB
The VIB section is identical to the one in Single mode. It provides a modulation
source very similar to LFOs 1-5, although it doesn’t have as many options
available.
Saving an edited Multi
As soon as you change one of the Multi parameters, an asterisk will appear
next to the name of the Multi. This is to remind you to save the Multi before
selecting another one, or else you will lose the edits you have made.
The process is basically the same as that described previously “Saving an
edited preset”: click either the single-disc icon to overwrite the original file, or
click the double-disc icon to keep the original preset the way it was and save
a renamed copy of your latest edits.
If you started with a Factory preset then the “Save Preset As…” window will
open automatically no matter which icon you click.
After the window opens the first thing you might want to do is select a new
bank or type for the preset. There’s a drop-down menu in each field for this
purpose: