User Manual
Table Of Contents
- User Manual
- Special thanks
- Introduction
- Table Of Contents
- History of the original instrument
- ACTIVATION AND FIRST START
- USER INTERFACE
- THE SYNTHESIZER
- THE BASICS OF SUBTRACTIVE SYNTHESIS
- A FEW ELEMENTS IN SOUND DESIGN
- END USER LICENSE AGREEMENT
3.5.1. Overview of the “Classic” mode
The “Classic” mode holds 50 synthesis settings, which will allow you to conceive an infinite
variety of sounds. The knobs and switches associated to these parameters are found
regrouped on the panel above the keyboard.
These parameters are composed of:
3 oscillators (VCO) which deliver the base audio signal thanks to 6 wave forms (triangle,
sawtooth 1 and 2, square, rectangle 1 and 2) and manage the height of the sound (the
frequency). The third can also be used as a modulator when its signal is directed to the filter
or oscillators.
A Mixer allows you to mix the signals coming from the oscillators or the noise module.
A low-pass 24dB resonant filter
An ADS envelope modulating the low-pass filters
1 amplifier (VCA) allowing the amplification of the signal coming from the filter to direct it to
the stereo output.
An ADS envelope modulating the signal going through the amplifier.
The synthesis parameters
31 Arturia - User Manual Mini V - USER INTERFACE