User`s manual

Arturia MiniBrute Connection User's Manual 10 3 Firmware Update
This can be fixed easily:
1. Close the MiniBrute Connection software editor.
2. Reboot your instrument.
3. Launch the MiniBrute Connection software editor and try again.
4.4.2 Update has been interrupted
If something went wrong during the firmware update process (computer crash, unplugged USB
cable, zombie attack, etc.), there is still a possibility to restore the instrument:
1. Close the MiniBrute Connection software.
2. Reboot the instrument while pressing down the octave Down and Up buttons: all octave
LEDs should be lit.
3. Launch the MiniBrute Connection software: you will be prompted for the automatic
firmware update. Just cancel, it won't work.
4. Enter into the Firmware Update view, and run the manual update.
5. Reboot the instrument, then click OK. Your MiniBrute is now fully restored and updated.