User`s manual

Arturia MiniBrute Connection User's Manual 3 3 Firmware Update
1 INSTALLATION
1.1 HARDWARE
Connect the MiniBrute synthesizer to your computer using a standard USB cable, then power up:
1.2 SOFTWARE
The MiniBrute Connection software editor is freely available from the Arturia website :
http://www.arturia.com/products/minibruteconnection
Simply extract the archive, select the appropriate folder, depending on your computer
operating system:
• “OSX” for Mac OS X
• “Win” for Windows
The software does not require any installation on your system, the program can be run directly
from its extracted folder. If you move the application, make sure it is always accompanied with
the mbf firmware file.
The MiniBrute Connection software editor offers two main features, described in the following
pages:
• the general configuration of the instrument (see chapter 2)
• the firmware update of the instrument (see chapter 3)