User`s manual

Arturia MiniBrute Connection User's Manual 7 3 Firmware Update
2.3 MIDI CHANNEL SELECT
This section allows you to independently set the MIDI
input and output channels.
2.3.1 Transmit Channel
This parameter sets the outgoing MIDI channel, i.e. the
channel the instrument will transmit messages onto.
This parameter is useful when the MiniBrute controls external devices.
Available channels are 1 to 16.
Select the appropriate MIDI channel by clicking the rotary potentiometer: it will increment step
after step until the desired value.
2.3.2 Receive Channel
This parameter sets the incoming MIDI channel, i.e. the channel the instrument will respond to.
This parameter is useful when the MiniBrute is being controlled by external devices.
Available channels are 1 to 16, and All which allows MiniBrute to respond whatever the channel.
Select the appropriate MIDI channel by clicking the rotary potentiometer: it will increment step
after step up to the desired value.
2.4 KEYBOARD PARAMETERS
This section allows the configuration of various
keyboard parameters such as the play mode, or
velocity and aftertouch response curves.
2.4.1 Note Priority
This parameter sets the play mode when more than one key is pressed:
• High: the highest note (pitch sorted) will be played.
• Last: the last note (time sorted) will be played.
• Low: the lowest note (pitch sorted) will be played.
2.4.2 Velocity Response
This parameter sets the velocity curve of the keyboard.
Three settings are available:
• : the keyboard sends linear values, i.e. low values will be sent when the keyboard is