User`s manual

by the Modulation Wheel so when it’s at its minimum position (Min) the targets
receive no LFO signal; when the switch is set on this position, make sure the
Modulation Wheel is fully engaged to maximum.
4.2.4.2 Aftertouch
The Aftertouch switch controls the aftertouch signal assignment;
aftertouch is very useful to trigger modulation events while playing
without using extra knobs or sliders, thus increasing expressiveness. The
Aftertouch switch has three positions: it can be routed the filter cutoff
frequency (Cutoff), used to trigger Vibrato [4.2.5], or be disabled (Off).
4.2.4.3 Bend Range
The Bend Range knob controls the range of the Pitch wheel [4.2.8.2].
With this knob fully counter-clockwise, the Pitch wheel ranges from -1/2
tone (lowest position) up to +1/2 tone. With this knob fully clockwise, the
Pitch wheel ranges from -1 octave (lowest position) up to +1 octave.
4.2.4.4 Glide
The Glide knob sets the amount of portamento (i.e., how long it takes
for the pitch to glide from one note to another when notes are played
on the keyboard or by the Sequencer). With this knob fully counter-
clockwise, there is no glide and the note pitch transitions instantly to the
next note. Turning this knob clockwise increases the portamento effect. At the
maximum setting, it takes approximately 4s to glide from the lowest C of the
MiniBrute keyboard to the highest C (two octaves above).
Arturia MiniBrute SE User's Manual 35 4 General description