User`s manual

ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL 119
The mixing
 On the fourth oscillator, set the “synchro” mode to “ON” and to “Hard” type. Then, turn the
“frequency” button to find the color and height of the sound that you like. This will also be
modulated by a third LFO (for this take the “Sin” output of oscillator 7 and set it to “Low”
mode so that it acts as a LFO).
 To save on CPU load, also click on the “Key F” (for Key Follow) button to deactivate the
keyboard connection mode. The frequency will thus be fixed.
 Modify the waveform width for and on the first 3 oscillators by connecting the
triangle output of LFO2 to the impulse modulation input (“PWM”) of the first “driver”
oscillator. This will add new harmonic colors typical of analog synthesizers. Set the Pulse
Width knob value towards the middle so that the sound does not disappear when the pulse
width is at 10% (equivalent to the closed position of this knob).
Manual pulse width setting
 Set the resonance button of the first 2 filters to 9 o’clock and connect the “Sin” wave forms
of LFO1 to one of their modulation inputs.
 Next set the 2 modulation levels and the LFO speed to your liking.