User`s manual

130 ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL
Sequencer startup through a MIDI keyboard
9.3.3 Stereo without the effects
Obtaining a stereo sound comes down to treating 2 independent channels. Each of the output
VCA is positioned in stereo space using the “pan” knob.
 Set the VCA1 “pan” to the left, and the VCA2 to the right to create 2 independent channels
needed for convincing stereo.
Setting the output VCA panoramic
 Connecting a different oscillator to each of the VCA allows you to obtain a very wide space.
To make it evolve, apply a light detuning to one of the oscillators using a LFO or an
envelope. The sound will seem like it’s turning in space, or in the second case, passing
from one point to another.
 To keep the stereo space very wide, it is essential to keep the 2 channels independent. Il It
is thus necessary to use a filter for each of them. These filters can then be modulated in an
identical manner, or differently without interfering with the stereo space.
 For a right to left movement, you can also modulate the output VCA with an auxiliary
envelope, once connected, set the modulation level to a positive value for one and negative
for the other.