User`s manual

ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL 139
The pink noise output is filtered by a low pass filter (6 dB/oct) and directed to the sample &
hold audio in. The audio out of the latter is connected to one of the 3 cut-off frequency
modulation inputs of the low pass filter.
 The result is random changes to the filter cut-off frequency.
 Now set the modulation rate by turning the “Clock rate” knob on the Sample and Hold
module.
 By setting the filter cut-off frequency on the “Noise” module, the high-pitched
frequencies will be filtered. The variations in modulation will be “softened” in this
manner.
 By using the “Glide” knob on the “Sample and Hold” module, these modulation If you want
to soften these variations there are two solutions:
 variations will be smoother.
The new modules included with the Moog Modular V 2.0 will add a large number of editing
possibilities. They were difficult to create (impossible in some cases) before. Don’t hesitate to
experiment in new editing methods.