User`s manual

ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL 29
Saving a preset
5.3 M ODULAR SYNTHESIZER
The modular synthesizer cabinet contains 28 modules, which will help you to create an infinite
variety of sounds. These 28 modules can be broken down into different categories and will be
connected by cables.
5.3.1 First connections
Let’s see how to quickly create an evolving polyphonic sound:
 To correctly understand the programming of the Moog Modular V, select the “Blank_ synth”
preset in the “User” / “Blank” bank. It holds no connections and thus produces no sound.
 Take the “saw” output of oscillator2 and connect it to the audio input of filter1 (low-pass 24
dB). To do this click on the output jack of the waveform (a cable will appear) and drag it to
the filter1 input “in”. Once the cable has been released in the input jack, the connection
has been made.
Connection between oscillator 1 and filter 1
You can also create a connection by choosing the cable destination with a menu with a right click (or shift click) on
the output jack.
To delete a cable, click on it, it will then appear in a clearer color to show that it is selected. Press the “DEL” key on
the keyboard to remove the connection.
 Now connect the audio output of this filter to the VCA1 (voltage controlled amplifier) audio
input. Once the connection has been made, you can “play the sound” on your MIDI
keyboard or the virtual keyboard offered by the Moog Modular V.