User`s manual

56 ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL
6.3.1.2 Mouse control (higher linear precision)
The Moog Modular V allows access to a higher level of precision when adjusting the knobs with
the mouse, with the use of the right click (or [Shift]+click). In this mode, the precision of
movement is multiplied by 4 in relation to the normal linear mode. This mode can be accessed
no matter which mode has been chosen on the sequencer (circular or linear).
6.3.1.3 Mouse control (circular)
Click on the knob and turn in a circle around it to change the value of the controller. The
rotation mode gives a higher level of precision in the manipulation of controls: the farther the
mouse goes from the knob, the higher the precision of the setting.
6.3.2 Joysticks
The usage page of the Moog Modular V offers two 2 dimensional control joysticks. The outputs
can be used as a source of modulation for all of the synthesizer’s modules. The utility of these
joysticks is that they simultaneously give control of two parameters to the mouse, with great
ease. The 2 joystick outputs are visible in the conception page:
The control joystick outputs are available in the conception page
When the joysticks are connected, the names of the concerned modulation inputs appear in
the digital displays above the joysticks.
The names of the connected modulation inputs appear above the joysticks
6.3.3 Selectors
The Moog Modular V presents selectors of several types:
• The “switch” type selectors: simply click on these selectors to change their state.
“Switch” type selectors
• Rotating selectors: used like knobs (by click and drag with the mouse)