User`s manual
ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL  81 
There are 16 independent amplifiers. Each has its own volume setting with the rotating “level” 
button and its amplitude modulation input. 
These  amplifiers  can  be  regrouped  to  form  mixers.  To  group  2  amplifiers,  just  click  on  the 
“Link” button separating them. 
When 2 amplifiers form a group, the output signal of the first corresponds to the sum of their 
collective  outputs,  whereas  the  output  of  the  second  remains  identical  to  the  signal  before 
grouping. 
To restore their independence, just click on the “Link” button. 
It is possible to add as many amplifiers as necessary. In this case it is still the output of the 
first amplifier, which  will  have the signal  corresponding to the sum  of all of the  amplifiers of 
the group, the others retaining their independence. 
Thanks to this method, with 16 amplifiers to begin with, it is possible to create a large range of 
mixing while keeping a few amplifiers available for modulation. 
We  can,  for  example,  form  a  group  of  the  first  six  amplifiers  to  mix  the  first  six  oscillators, 
then a group with the next 3 to mix the 3 last oscillators, and finally a group with the next 2 to 
mix the outputs of 2 filters which will respectively treat the output of the first amplifier and the 
output of the seventh. There are 5 remaining amplifiers for modulation or other mixes. 
Each  amplifier  possesses  a  current  limiting  function  allowing  a  soft  clipping.  This  function  is 
activated  with  the  “clip”  button.  The  “inv”  button  lets  you  invert  the  signal,  as  input  to  the 
corresponding amplifier.. 
The  four  right  VCA  are  modulated  with  a  linear  function,  on  the  contrary,  the  other  are 
modulated with a exponential function. 
7.1.8  Trigger delay 
Trigger delay 
Time 1  Sets the time for the first delay 
Trigg 1 Input  Choice of trigger input for the first delay 
Mode  Choice of mode (independent, parallel, series) 
Time 2  Sets the time for the second delay 
Trigg 2 Input  Choice of trigger input for the second delay 
Time1 
Time2 
Mode 
Trigg 1 Input 
Trigg2 Input 










