User Manual

Besides timer alarm, any other alarms can
be turned off by pressing button1, 2 or 3. If
the alarm signal is not turned off manually,
it will be turned off automatically after 7
minutes.
There are three different clarm sounds for
your choice. When the display field shows
the current time, press button 4, you can
select the alarm sound you want. Once the
alarm sound is set, it will be introduced to
the memory.
Caution!
Semi- automatic operation
If the oven is to be switched off at a given
time, or after defined period, you should:
1. Set the oven function knob and the
temperature regulator knob to the
setting at which you want the oven to
operate.
2. Press buttons 2 and 3 simultaneously,
the oven will begin to work and the
function signal is on.
3. Press button 2 or 3, then the display
will show flashing “A”.
4. Set the required time using buttons 4
and 5, within a range from 1 minute to
10 hours.
5. The set time is introduced to the
memory after 5 seconds, then the
display will show the current time. At
the same time, the function signal “A”
is on.
6. When the set time has passed , the
oven is switched off automatically, the
alarm is activated, the signal function
Caution!
For example:
1
2
3
4
5
6
12
● If set the cooking time to be 0 or set
the switch-off time to be the current
time, the auto function will be off.
:
1
2
3
4
5
First method:
is off, and the signal function “A”
starts flashing again.
● The cooking time and switch-off time
range
Cooking time range: 0 < t ≤10 hours
Switch-off time range: current time <
switch-off time ≤ current time + 10
hours
Switch-off time = current time +
cooking time
● Set the cooking time or switch-off time
When use the semi-automatic
operation, set either the cooking time
or the switch-off time.
The current time is 2:00, the maximum
switch-off time is set to be 12:00
(2:00+10:00=12:00).
There are two methods to achieve this
setting:
1. Press button 2, then the display will
show flashing “A”.
1 2
3
4
5
1
2
3
4
5
3. 5 seconds after the time
signal function
is on. The new data
will be saved and the display will show
the current time.
4. Press button 1, the remanent
be shown on the display. （
minute, the display will
remanent seconds）
1
2
3
4
5
2. Set the timer using buttons 4
“0.00” and flashing .
11
Timer
The timer can be activated at any time and
any function. The timer can be set for from
1 minute to up to 23 hours and 59 minutes.
To set the timer you should:
1.
Press button 1, the display will show
is set, the
time will
In the last
show the
1
2
3
4
5
If you want to reset the timer, repeat
and 5.
5. When the set time is up the alarm
signal will be activated and the signal
function
starts flashing again.
1 2
3
4
5
1 2
3
4
5
Set the cooking time using buttons 4
and 5.
1 2
3
4
5
Press button
3, then the display will
show flashing “A”.
1
2
3
4
5
Set the switch-off time using buttons 4
and 5.
1 2
3
4
5
A
A
A
A
If the oven is to be switched on for a
specified period of time and switched off at
a fixed hour then you should set the cooking
time and the stop time:
1. Set the oven function knob and the
temperature regulator knob to the
setting at which you want the oven to
operate.
2. Press buttons 2 and 3 simultaneously,
the oven will begin to work and the
function signal
is on.
3. Press button 2 , then the display will
show flashing “A”. Set the cooking
time using buttons 4 and 5, within a
range from 1 minute to 10 hours
.
4. Press button 3, s et the switch-off time
4 and 5.
Automatic operation
using buttons
step 2 and set time to 0:00 .
and alarm signal will go off.if
signal is not turned off
be turned off
minutes.
the
alarm
manually,it will
automatically after 7
7. Press button 1, 2 or 3 , the alarm signal
will go off. The signal “A” still flashing.Or if
the alarm signal is not manually,turned off
it will be turned off after 7automatically
minutes.
5 seconds after the setting, the auto
function is on.
10 hours later, the current time shows
“12.00” The alarm signal is activated, the
signal function is off, and the signal
function “A” starts flashing.