AP PL I A NC ES FO R L I V I N G AFGE5440W, AFGE5470W, AFGE5470X, AFGE6070W OPERATION MANUAL
Congratulations, you are now the proud owner of an ARTUSI cooking appliance. Thank you for purchasing ARTUSI and welcome to the ARTUSI Family. This instruction manual has been specially created to inform you of the full range of features your ARTUSI appliance has to offer and serves as an introduction to getting the very best out of your ARTUSI appliance. Dear Artusi Customer, please read this user manual carefully before using the product and, keep it permanently at your disposal.
DESCRIPTION OF THE APPLIANCE INSTALLATION This appliance must be installed by an authorised person in accordance with this instruction manual, AS/NZS 5601.1-Gas installations (installation and pipe sizing), local gas fitting regulations, local electrical regulations, Building Code of Australia and any other government authority.
OPERATION OPERATION AFGE5470W/AFGE5470X/AFGE6070W Oven function Control knobs Oven temperture Control knobs How to use gas burners Choice of cookware Mind that the diameter of a pan base is always larger than the burner flame crown, and that the pan itself is covered. The recommended pan diameter is around 2.
OPERATION OPERATION Selection of the approprite flame A correctly adjusted burner has a light blue flame with a clearly visible internal cone. Flame size depends on the position of the burner knob which has been set: Large flame Small flame(“economical flame”) Burner switched off (gas supply is cut off) Depending on requirements, flame size can be set in a continuous manner. Oven Oven is controlled by the function knob and the temperature control knob.
OPERATION Base Heat At this oven function knob position, the oven activates the bottom heater. Defrost This function for defrosting Fan Forced At this function, allows the oven to be heating up in a forced way with the thermofan, which is in the central part of the oven heating method is: Redution of oven heating-up time and of the initial heating stage. Possibility to bake at two cooking levels simultaneously. BAKING IN THE OVEN Fan Assisted At this knob position the oven executes the cake function.
CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE Repacement of the oven light bulb Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply. If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance. Changing the bulb Unscrew the protective cover. We recommend that you wash and dry the glass cover at this point.
CLEANING AND MAINTENANCE TECHNICAL INFORMATION In the event of an emergency, you should: Switch off all working units of the cooker Disconnect the mains plug Call the service centre Some minor faults can be fixed by referring to the instructions given in the table below. Before calling the customer support centre or the service centre check the following points that are presented in the table.
Card. Please contact artusi on 1300 694 583 should you not wish to be contacted by Worldwide Appliances. Worldwide Appliances Pty Limited A.B.N. 45868077422 Office: 48-50 Moore Street, Leichhardt N.S.W 2040 Post: Locked Bag 3000, Annandale, N.S.W 2038 P: 1300 694 583 WARRANTY REGISTRATION Your ongoing satisfaction with your artusi product is important to us. We ask that you complete the enclosed Warranty Registration Card and return it to us so that we have a record of the artusi product purchased by you.
5. Proof of Purchase Customers must retain proof of purchase in order to be eligible to make a warranty claim in respect of an artusi product. (c) Worldwide Appliances excludes indirect or consequential loss of any kind (including, without limitation, loss of use of the artusi product) and (other than expressly provided for in these terms and conditions) subject to all terms, conditions and warranties implied by custom, the general law, the Act or other statute.
DISCLAIMER Worldwide Appliances PTY LTD, trading as ARTUSI, is continually seeking ways to improve the design specifications, aesthetics and production techniques of its products. As a result alterations to our products and designs take place continually. Whilst every effort is made to produce information and literature that is up to date, this brochure should not be regarded as an infallible guide to the current specifications, nor does it constitute an offer for the sale of any particular product.