APPLI A NC E S FOR L I V I NG AUM51X OPERATION MANUAL
Congratulations, you are now the proud owner of an ARTUSI cooking appliance. Thank you for purchasing ARTUSI and welcome to the ARTUSI Family. This instruction manual has been specially created to inform you of the full range of features your ARTUSI appliance has to offer and serves as an introduction to getting the very best out of your ARTUSI appliance. We present detailed information on each of the features your ARTUSI appliance consists of.
IE Getting started... GB Safety These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference. • All installation work must be carried out by a competent person or qualified electrician. • This appliance must be installed correctly by a suitably qualified person, strictly following the manufacturer’s instructions.
not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children less than 8 years. Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be connected in fixed wiring. Regularly check the power plug and power cord for damage.
IE Getting started... GB 6 Safety Do not use flammable sprays in close vicinity to the appliance. We also recommend that great care be taken during use and cleaning. Read the cleaning and maintenance sections for this appliance carefully. A steam cleaner is not to be used. The appliance is not intended to be operated by means of external timer or separated remote-control system. The appliance is for domestic use only. Warning: Consult local regulations regarding fumes outlets.
involves no risk of damage. Switch off the electricity supply to the hood and reconnect after one minute. To avoid the risk of fire, clean the metal filter regularly and closely watch and regulate pans containing hot oil. Do not use the hood if it shows signs of damage or imperfection. Contact customer services. Flambe cooking must not be carried out underneath this appliance.
IE Getting started... GB Before you start Things to check before you start To avoid the risks that are always present when you use an electrical appliance it is important that this cooker hood is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the cooker hood please check that it is not damaged.
IE In more detail... GB Operation Product functions • This appliance extracts the air of the kitchen to remove the odours and keep an optimum level of air quality inside the room, it also allows you to illuminate the cooking area. Switching on/off • Switch on the appliance at the switched fused connection unit. The appliance is ready for use. 0 A 1 0 B 1 2 C Motor control light(Ref. B) Light switch(Ref. A) 3 position motor control swtich(OFF, 1st and 2nd speed position) (Ref.
Care and maintenance Warning Always switch off the electricity supply before carrying out maintenance work on the hood. In the event of a fault, contact customer services. FUSE OFF GB IE In more detail... Care and maintenance Bulb replacement FUSE OFF 10’ The Bulb may be hot, leave it 10 minutes before replacement. Turn to remove the bulb.
IE In more detail... GB Care and maintenance Active charcoal filter replacement 1 X ACTIVE CHARCOAL FILTER (NOT SUPPLIED).
Aluminium and active charcoal filters replacement GB IE In more detail... Care and maintenance 1 MONTH MAX.65˚C Aluminium filters: To avoid fires, clean thoroughly once a month or whenever the display pilot light lights up (if fitted). To do so, remove the filters and soak in hot water and detergent for an hour. If using a dishwasher, position the filters vertically to improve the cleaning process. Active charcoal filters: Replace every 3 months.
IE In more detail... GB Troubleshooting Troubleshooting Fault Excessive vibration. Light on, but motor does not work. Both light and motor do not work. Suction performance reduced. Works normally but cooking smells linger. 14 Cause The appliance is not installed properly on the brackets. The fan blade is damaged. The fan motor is not fixed tightly. Solution Take down the appliance and check it is properly fixed. Switch off the appliance. Repair to be carried out by qualified service personnel only.
Recycling and disposal Environmental protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. GB IE In more detail... Recycling and disposal Technical and legal information The symbol on the product or its packaging indicates that this product cannot be treated as normal household waste.
IE In more detail... GB Technical and legal information Wiring All installation work must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate. WARNING: THIS APPLIANCE MUST BE EARTHED.
Technical and legal information The Manufacturer declines all liability for damage caused to persons and objects due to incorrect or improper installation of the appliance. Electrical Requirements Any permanent electrical installation must comply with the latest I.E.E. regulations and local electricity company regulations.
02 [06 [02] x 1 [06] x 2 Fix the collar. 03 Remove the front panel.
04 [05] x 4 302 275 225 A 75 ∅120 [05] B 478 510 12 170 453 MOUNTING THE HOOD UNDERNEATH A CUPBOARD Both extraction and recirculation options can be used EXTRACTION Cut a hole in the cupboard base to suit the position of the exhaust vent in the visor hood and size to suit the vent kit being used. Connect collar vent kit. Using 4 screws [05] attach the cooker hood to the underside of the cupboard using the 2 hole position (A) and 2 hole position (B).
05 Replace the aluminium Filter 22
Warranty Card Worldwide Appliances Pty Limited A.B.N. 45868077422 Office: 48-50 Moore Street, Leichhardt N.S.W 2040 Post: Locked Bag 3000, Annandale, N.S.W 2038 P: 1300 694 583 WARRANTY REGISTRATION Your ongoing satisfaction with your artusi product is important to us. We ask that you complete the enclosed Warranty Registration Card and return it to us so that we have a record of the artusi product purchased by you.
Warranty Card continued 4. Time for Claim under the Warranty You must make any claim under this Warranty within twenty eight (28) days after the occurrence of an event which gives rise to a claim pursuant to the Warranty, by booking a service call on the telephone number below. 5. Proof of Purchase Customers must retain proof of purchase in order to be eligible to make a warranty claim in respect of an artusi product. 6.
DISCLAIMER Worldwide Appliances PTY LTD, trading as ARTUSI, is continually seeking ways to improve the design specifications, aesthetics and production techniques of its products. As a result alterations to our products and designs take place continually. Whilst every effort is made to produce information and literature that is up to date, this brochure should not be regarded as an infallible guide to the current specifications, nor does it constitute an offer for the sale of any particular product.
