User Manual

Page 10 of 13
Trouble Shooting Guide
Problem Possible Reason Solution
Hood doesn't turn on.
No electrical supply. Check the plug is connect-ed.
Check the plug is connect-ed.
Power cord is damaged Contact technician service
Poor Airflow
Aluminum grease filters
clogged
Clean the filters and replace
when dry.
Charcoal filters clogged.
Re-circulating mode only.
Replace the charcoal filters.
Hood is vibrating
Hood is not secured in place Check the installation of
hood.Tighten mounting
screws.
Motor running but no
air flow
Butterfly valve jammed. Contact technician service
Motor stops after a
few minutes
High temperature safety
device activated.
The kitchen is not
sufficient-ly ventilated.
The hood is installed too near
the cooking surface.
The hood must be at least
61cm (24”) from the stove
Strong cooking smell.
Fan speed too low
Use one of the higher
set-tings.
Charcoal filters not installed.
n re-circulating mode,
char-coal filters must be
installed.
Oil dripping onto
stove.
Aluminum grease filter
satu-rated.
Wash the aluminum grease
filters
Whirring sound Something in contact with fan
blade.
Contact technician service
Lights are working
but
fan isn't
Contact technician service
Fan is working but
lights are not
Contact technician service
GUARANTEE AND SERVICE!
Before booking a service call, read the Trouble Shooting Guide above , for more
information on guarantee and
service conditions, please contact local dealer.