User Manual

Page 5 of 13
REMEMBER!

The distance between the top of the hob and the lowest part of the
cooker hood must be at least 65 cm.
If a two-part connection tube is used, the lower section must sit outside
the upper sec-tion.
Do not connect the cooker hood exhaust to a duct used to circulate hot air
or vent steam from another appliance.
Always use protective gloves when installing the appliance!
Fixing to the ceiling cabinet
1. Before mounting the hood, plug in and test all functions for proper operation.
2. Removed the filters from the bottom of the hood to pre-vent damage during the
installation.
3. Connected duct tube (if included with the range hood) to the top of the range
hood using duct tape on all seals.
4. With assistance, hold the hood temporary in position ensuring the bottom is
above the minimum clearance for the cooking surface. Mark on the cabinet the
holes for the four mounting screws.
5. Drill the holes at the distances indicated.
6. Mount the hood on the cabinet screws and adjust for appropriate position. When
the hood has been adjusted, secure unit by tightening screws.