APPLI A NC E S FOR L I V I NG AWM1712W OPERATION MANUAL
Congratulations, you are now the proud owner of an ARTUSI cooking appliance. Thank you for purchasing ARTUSI and welcome to the ARTUSI Family. This instruction manual has been specially created to inform you of the full range of features your ARTUSI appliance has to offer and serves as an introduction to getting the very best out of your ARTUSI appliance. We present detailed information on each of the features your ARTUSI appliance consists of.
Thank you for choosing this product. This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.
CONTENTS 1.SAFETY INSTRUCTIONS ................................................................................ ................1 1.1 General Safety Warnings ...............................................................................................2 1.2 During Use ....................................................................................................................6 1.3 Packaging and Environment...........................................................................................7 1.
1. SAFETY INSTRUCTIONS Operating voltage / frequency (V/Hz) (220-240) V~/50Hz Total current (A) 10 Water pressure (Mpa) Maximum 1 Mpa / Minimum 0. 1Mpa Total power (W) 2200 Maximum washing capacity (dry laundry) (kg) 7.0 • Do not install your machine on a carpet or such grounds that would prevent the ventilation of its base.
NOTE: For a softcopy of this user manual, please contact the following address: “washingmachine@ standardtest. info”. In your e-mail, please provide the model name and serial number (20 digits) which you can find on the appliance door. Read this user manual carefully. Your machine is for domestic use only. Using it for commercial purposes will cause your warranty to be cancelled.
water supply if the Washing Machine is left unused for a long time. We also recommend that you leave the door open to prevent build up of humidity inside the Washing Machine. • Some water may be left in your Washing Machine as a result of quality checks during production. This will not affect the operation of your Washing Machine. • The packaging of the machine could be hazardous to children. Do not allow children to play with the packaging or small parts from the Washing Machine.
• Install your machine in a location that can be fully ventilated and preferably has constant air circulation. Read these warnings. Follow the advice given to protect yourself and others from risks and fatal injuries. RISK OF BURNS Do not touch the drain hose or any discharged water while your Washing Machine is running. The high temperatures involved pose a burn risk. RISK OF DEATH FROM ELECTRICAL CURRENT • Do not connect your Washing Machine to the mains electricity supply using an extension lead.
secured. Make sure the plug in your sink does not block the plug hole. Danger of Fire • Do not store inflammable liquids near your machine. • The sulphur content of paint removers may cause corrosion. Never use paint removing materials in your machine. • Never use products that contain solvents in your machine. • Please ensure that garments loaded into your Washing Machine are free from foreign objects such as nails, needles, lighters and coins.
and cleaning materials are consumed or come into contact with the skin and eyes. Keep cleaning materials out of the reach of children. 1.2 During Use • Keep pets away from your machine. • Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened. • Your machine must only be installed by an authorised service agent.
sources of damage. • Please do not throw away this user manual; keep it for future reference and pass it onto the next owner. NOTE: Specifications for the machine may vary depending on the product purchased. Replacement of drive belt, only by authorized service. Only original spare belt: 42006396 Optibelt 6 EPJ 1236 1.3 Packaging and Environment Removal of packaging materials Packaging materials protect your machine from any damage that might occur during transportation.
CE Declaration of conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
2. TECHNICAL SPECIFICATIONS 3 2 1 4 5 6 7 8 9 10 2.1 General Appearance 1. Electronic Display 2. Programme Dial 3. Upper Tray 4. Detergent Drawer 5. Drum 6. Pump Filter Cover 7. Water Inlet Valve 8. Power Cable 9. Discharging Hose 10. Transit Bolts 2.2 Technical Specifications Operating voltage / frequency (V/Hz) (220-240) V~/50Hz Total current (A) 10 Water pressure (Mpa) Maximum: 1 Mpa Minimum : 0.
3. INSTALLATION 3.2 Adjusting the Feet / Adjusting Adjustable Stays 3.1 Removing the Transit Bolts X4 X4 1 2 1. Do not install your machine on a surface (such as carpet) that would prevent ventilation at the base. • To ensure silent and vibration-free operation of your machine, install it on a firm surface. X4 3 4 1. Before operating the washing machine, remove the 4 transit bolts and rubber spacers from the rear of the machine.
• Your Washing Machine requires a 220240V, 50Hz mains supply. • The mains cord of your washing machine is equipped with an earthed plug. This plug should always be inserted to an earthed socket of 10 amps. • • If you do not have a suitable socket and fuse conforming with this, please ensure the work is carried out by a qualified electrician. • We do not take responsibility for damage that occurs due to the use of ungrounded equipment.
must only be connected to your water supply using the supplied new fill hose. Old hoses must not be reused. 4.1 Detergent Drawer 3.5 Water Discharge Connection • Connect the water drain hose to a standpipe or to the outlet elbow of a household sink, using additional equipment. • Never attempt to extend the water drain hose. • Do not put the water drain hose from your machine into a container, bucket or bathtub. • Make sure that the water drain hose is not bent, buckled, crushed or extended.
the machine purchased. 4.2 Sections Main wash detergent compartment: 4.3 Program Dial This compartment is for liquid or powder detergents or limescale remover. The fluid detergent level plate will be supplied inside your machine. (*) Fabric conditioner, starch, detergent compartment: • To select the desired programme, turn the programme dial either clockwise or anti-clockwise until the marker on the programme dial points to the chosen programme.
the current stage of the programme you are running on your machine ( prewash/ wash, rinsing, spinning). The display panel shows “End” when the selected programme is complete. The display panel also indicates if a fault has occurred with your machine. 5. USING YOUR WASHING MACHINE 5.1 Preparing Your Laundry 1 3 5 pockets; if so, remove them. CAUTION: Any malfunctions which occur due to foreign materials damaging your machine are not covered by the warranty. 4. Close zips and fasten any hooks and eyes.
• Open the door of your machine. • Spread your laundry evenly in the machine. and the rest in compartment II. • Use detergents produced for automatic washing machines. Follow the manufacturer’s instructions on the amount of detergent to use. • In areas of hard water, more detergent will be required. • The amount of the detergent required will increase with higher washing loads. • Put softener in the middle compartment of the detergent drawer. Do not exceed the MAX level.
5.6 Half-Load Detection System Your machine features a half-load detection system. If you put less than half the maximum load of laundry into your machine it will automatically set the half-load function, regardless of the programme you selected. This means that the selected programme will take less time to complete and will use less water and energy. (*) Model Dependant 5.7 Additional Functions Before starting a programme, you can select an additional function.
To adjust the spin speed between the maximum spin speed and the cancel spinning option (--), press the Spin speed button until the desired speed is displayed. If you have skipped the spin speed you want to set, keep pressing the spin speed adjustment button until the desired spin speed is displayed again. 3. Delay Timer Delay Timer 4. Anti- Allergic(*) Auxiliary function button 4 Antiallergic You can add an additional rinse operation to your laundry using this additional function.
the main washing programme takes place. When using this function, put detergent in front washing compartment of the detergent drawer. To select this function, press the Pre-wash button when the symbol is displayed. 7. Extra Rinse(*) (*) Model Dependant 9. Start/Pause Button Start-Pause Auxiliary function button 4 Extra rinse You can add an additional rinse operation to the end of the selected wash programme using this additional function.
5.8 Cancelling the Programme To cancel a running programme at any time: 1. Turn the programme dial to the “STOP” position. 2. Your machine will stop the washing operation and the programme will be cancelled. 3. Turn the programme dial to any other programme to drain the machine. 4. Your machine will perform the necessary draining operation and cancel the programme. You can now select and run a new programme. 5.
Programme Washing temperature (°C) Maximum dry laundry amount (kg) Detergent compartment Programme duration (Min.) 6. PROGRAMME TABLE Laundry type / Descriptions COTTON 90° 90° 7,0 2 190 Very dirty, cotton and flax textiles. (Underwear, linen, tablecloth, towel (maximum 3.5 kg), bedclothes, etc.) Pre-Wash Cotton 60° 7,0 1&2 180 Dirty cotton and flax textiles. (Underwear, linen, tablecloth, towel (maximum 3,5 kg), bedclothes, etc.) 60° 7,0 2 265 Dirty cotton and flax textiles.
7. CLEANING AND MAINTENANCE 7.2 Water Inlet Filters Water inlet filters prevent dirt and foreign materials from entering your machine. We recommend that these filters are cleaned when your machine is unable to receive sufficient water, although your water supply is on and the tap is open. We recommend that you clean your water inlet filters every 2 months. 7.1 Warning Turn your mains power supply off and remove the plug from the socket before carrying out maintenance and cleaning of your machine.
7.3 Pump Filter meet the holes on the front panel side. 6. Close the filter cover. WARNING: 1 The water in the pump may be hot, wait until it has cooled down before carrying out any cleaning or maintenance. 2 (*) Specifications may vary depending on the machine purchased. 3 4 5 6 7.4 Detergent Drawer The use of detergent may cause residual build up in the detergent drawer over time. We recommend that you remove the drawer every 2 months to clean the accumulated residue.
8. FLUSH STOPPER / BODY / DRUM 1 1. Flush stopper Remove the detergent drawer and disassemble the flush stopper. Clean thoroughly to completely remove any softener residue. Refit the flush stopper after cleaning and check that it is seated properly. 2 3 2. Body Use a mild, non-abrasive cleaning agent, or soap and water, to clean the external casing. Wipe dry with a soft cloth. 3. Drum Do not leave metallic objects such as needles, paper clips, coins etc. in your machine.
9. TROUBLESHOOTING Repair of your machine should be carried out by an authorised service company. If your machine requires repair or if you cannot solve an issue with the information provided below, then you should: • Unplug your machine from the mains power supply. • Turn off the water supply. FAULT Your machine does not start. Your machine does not intake water. Your machine does not discharge water. Your machine vibrates. Excessive foam is formed in the detergent drawer.
FAULT POSSIBLE CAUSE TROUBLESHOOTING Hard water. Increase the amount of detergent following the manufacturer’s instructions. Your laundry is too tightly packed together in the drum. Check that your laundry is spread out. As soon as the machine is loaded with water, water discharges. The end of water drain hose is too low for the machine. Check that the drain hose is at a suitable height. (**) . No water appears in the drum during washing. No fault. Water is in the unseen part of the drum. ......
11. DESCRIBING THE ENERGY LABEL AND SAVING ENERGY 1 Use programmes of shorter duration for lightly soiled laundry and daily washes. Carry out cleaning and maintenance at regular intervals. 2 3 4 5 6 7 8 9 1. Brand 2. Model 3. Energy Class 4. Energy Consumption 5. Noise Value While Washing 6. Noise Value While Spinning 7. Annual Water Consumption 8. Dry Laundry Capacity 9.
Warranty Card Worldwide Appliances Pty Limited A.B.N. 45868077422 Office: 48-50 Moore Street, Leichhardt N.S.W 2040 Post: Locked Bag 3000, Annandale, N.S.W 2038 P: 1300 694 583 WARRANTY REGISTRATION Your ongoing satisfaction with your artusi product is important to us. We ask that you complete the enclosed Warranty Registration Card and return it to us so that we have a record of the artusi product purchased by you.
Warranty Card continued 4. Time for Claim under the Warranty You must make any claim under this Warranty within twenty eight (28) days after the occurrence of an event which gives rise to a claim pursuant to the Warranty, by booking a service call on the telephone number below. 5. Proof of Purchase Customers must retain proof of purchase in order to be eligible to make a warranty claim in respect of an artusi product. 6.
DISCLAIMER Worldwide Appliances PTY LTD, trading as ARTUSI, is continually seeking ways to improve the design specifications, aesthetics and production techniques of its products. As a result alterations to our products and designs take place continually. Whilst every effort is made to produce information and literature that is up to date, this brochure should not be regarded as an infallible guide to the current specifications, nor does it constitute an offer for the sale of any particular product.
