User Manual
Table Of Contents
- 1. SAFETY INSTRUCTIONS
- 1.1 General Safety Warnings
- 1.2 During Use
- 1.3 Packaging and Environment
- 1.4 Savings Information
- 2. TECHNICAL SPECIFICATIONS
- 2.1 General Appearance
- 2.2 Technical Specifications
- 3. INSTALLATION
- 3.1 Removing the Transit Bolts
- 3.2 Adjusting the Feet / Adjusting Adjustable Stays
- 3.3 Electrical Connection
- 3.4 Water Inlet Hose Connection
- 3.5 Water Discharge Connection
- 4. CONTROL PANEL OVERVIEW
- 4.1 Detergent Drawer
- 4.2 Sections
- 4.3 Program Dial
- 4.4 Electronic Display
- 5. USING YOUR WASHING MACHINE
- 5.1 Preparing Your Laundry
- 5.2 Putting Laundry in the Machine
- 5.3 Adding Detergent to the Machine
- 5.4 Operating Your Machine
- 5.5 Selecting a Programme
- 5.6 Half-Load Detection System
- 5.7 Additional Functions
- 5.8 Cancelling the Programme
- 5.9 Programme End
- 6. PROGRAMME TABLE
- 7. CLEANING AND MAINTENANCE
- 7.1 Warning
- 7.2 Water Inlet Filters
- 7.3 Pump Filter
- 7.4 Detergent Drawer
- 8. FLUSH STOPPER / BODY / DRUM
- 9. TROUBLESHOOTING
- 10. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
- 11. DESCRIBING THE ENERGY LABEL AND SAVING ENERGY
ARTUSI.COM.AU
P: 1300 649 583
NSW & ACT (HEAD OFFICE)
48-50 MOORE STREET
LEICHHARDT
F 02 8569 4699
QLD
1/42 CAVENDISH ROAD
COORPAROO
F 07 3397 0850
VIC, TAS & SA
1211 TOORAK ROAD
CAMBERWELL
F 03 9809 2155
WA & NT
UNIT 10/55 HOWE STREET
OSBORNE PARK
F 08 9201 9188
NZ
PO BOX 11.160
SOCKBURN CHRISTCHURCH
F 03 344 5906
ARTUSI OFFICES ARE OPEN DAILY FROM 9AM–5PM AND SATURDAYS 10AM–4PM
DISCLAIMER
Worldwide Appliances PTY LTD, trading as ARTUSI, is continually seeking ways to improve the design specifications, aesthetics and production
techniques of its products. As a result alterations to our products and designs take place continually. Whilst every effort is made to produce
information and literature that is up to date, this brochure should not be regarded as an infallible guide to the current specifications, nor does it
constitute an offer for the sale of any particular product. Product dimensions indicated in our literature is indicative only. Actual product only
should be used to define dimension cutouts. Distributors, and retailers are not agents of ARTUSI and are not authorised to bind ARTUSI by any
express or implied undertaking or representation.