5400R ZL2 Switch Series Data Sheet

DATA SHEET
ARUBA 5400R ZL2 SWITCH SERIES
SPECIFICATIONS
Aruba 5412R 92GT PoE+/4SFP+
(No PSU) v3 zl2 Switch (JL001A)
Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+/8-port
SFP+ (No PSU) v3 zl2 Switch (JL002A)
Performance
1000 Mb Latency < 2.8 µs (FIFO 64-byte packets) < 2.8 µs (FIFO 64-byte packets)
10 Gbps Latency < 1.8 µs (FIFO 64-byte packets) < 1.8 µs (FIFO 64-byte packets)
40 Gbps Latency < 1.5 µs (FIFO 64-byte packets) < 1.5 µs (FIFO 64-byte packets)
Throughput up to 1142.8 Mpps up to 571.4 Mpps
Routing/Switching capacity 1920 Gbps 960 Gbps
Switch fabric speed 2030 Gbps 1015 Gbps
Routing table size 10000 entries (IPv4),
5000 entries (IPv6)
10000 entries (IPv4),
5000 entries (IPv6)
MAC address table size 64000 entries 64000 entries
Environment
Operating temperature 32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C
transceiver installed, 0°C to 35°C with FIPS Opacity
Shield installed
32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C
transceiver installed, 0°C to 35°C with FIPS Opacity
Shield installed
Operating relative humidity 15% to 95% @ 113°F (45°C),
noncondensing
15% to 95% @ 113°F (45°C),
noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 149°F (65°C),
noncondensing
15% to 95% @ 149°F (65°C),
noncondensing
Altitude up to 10,000 ft (3 km) up to 10,000 ft (3 km)
Acoustic Power: 49 dB, Pressure: 35.7 dB
ISO 7779, ISO 9296
Power: 44 dB, Pressure: 31.7 dB
ISO 7779, ISO 9296
Electrical characteristics
Frequency 50/60 Hz 50/60 Hz
80plus.org Certication Gold Gold
Description Does not come with power supply. Four open power
supply slots are available; three dierent power
supplies are available. See power supply products for
additional specications.
Does not come with power supply. Two open
power supply slots are available; three dierent power
supplies are available. See power supply products for
additional specications.
Maximum heat dissipation 4900 BTU/hr (5169.5 kJ/hr), (max. non-PoE);
7400 BTU/hr (7807 kJ/hr) (max. using PoE)
2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700
BTU/hr (3903 kJ/hr) (max. using PoE)
Voltage 110 - 127/200 - 240 VAC, rated
(depending on power supply chosen)
110 - 127/200 - 240 VAC, rated
(depending on power supply chosen)
Idle power 312 W 215 W
Notes Idle power is the actual power consumption of the
device with no ports connected.
Heat dissipation does not include heat dissipated by
the PoE-powered devices themselves. When more
than four power cords are installed in a 5412R zl2
switch chassis, additional installation requirements are
needed. Refer to the HPE 5400R zl2 Switches Quick
Setup Guide and Safety/Regulatory Information manual
for details.
Idle power is the actual power consumption of the
device with no ports connected.
Heat dissipation does not include heat dissipated by
the PoE-powered devices themselves.